Representative image of the range
ES-H · High-frequency inverters
ES-H-11KW
Pure sine wave, built-in MPPT, mains charger and battery management. The 6.2 and 11 kW units run up to six in parallel.
On quotation
PDF datasheet CE
- Rated power
- 11,000W
- Battery voltage
- 48V
Model specifications
| Rated power | 11,000 W |
|---|---|
| Battery voltage | 48 V |
| Peak efficiency | 93 % |
| Max PV open circuit voltage | 500 V |
| MPPT range | 90–450 V |
| PV inputs | 2 |
| Maximum PV current | 27 × 2 A |
| Maximum charging current | 80 × 2 A |
| AC charging current | 80 A |
| Max AC input current | 80 A |
| Start-up voltage | 120 ± 5 V |
| Overload protection | 100 ms > 205 % ; 5 s > 150 % ; 10 s 110–150 % |
| Units in parallel | 6 |
| Parallel communication | CAN |
| Parallel transfer time | 50 ms |
| Power unbalance | < 5 % to 100 % load |
| Dimensions | 430×618×152 mm |
| Weight | 18.3 kg |
| Operating temperature | -10 to 40 °C |
Shared range specifications
| Waveform | Pure sine wave |
|---|---|
| Voltage regulation | 230 Vac ± 5 % |
| Nominal input voltage | 230 Vac |
| Input frequency | 50 / 60 Hz, auto-detect |
| Efficiency (line mode) | > 95 % at rated load, battery full |
| Surge capacity | 2 × rated power for 5 s |
| Transfer time | 10 ms typical (UPS); 20 ms typical (appliances) |
| Certification | CE |
| Humidity | 5 to 95 % RH non-condensing |
ENSKY manufacturer specifications, subject to change without notice. Actual sizing depends on the site, the load profile and starting loads.
In the same family
The whole High-frequency inverters range
Unsure about sizing?
An engineer checks battery, inverter and solar array compatibility with you before any order.