Representative image of the range
ES-H · High-frequency inverters
ES-H-1.6KW
Pure sine wave, built-in MPPT, mains charger and battery management. The 6.2 and 11 kW units run up to six in parallel.
On quotation
PDF datasheet CE
- Rated power
- 1600W
- Battery voltage
- 12V
- Maximum PV array
- 1600W
Model specifications
| Rated power | 1600 W |
|---|---|
| Apparent power | 1600 VA |
| Battery voltage | 12 V |
| Peak efficiency | 94 % |
| Maximum PV array | 1600 W |
| Max PV open circuit voltage | 450 V |
| MPPT range | 30–430 V |
| Nominal PV voltage | 240 V |
| Maximum charging current | 80 A |
| Max AC charging current | 60 A |
| Overload protection | 5 s > 150 % ; 10 s 110–150 % |
| No-load consumption | 25 W |
| Dimensions | 405×303×107 mm |
| Weight | 5.72 kg |
| Operating temperature | -10 to 50 °C |
Shared range specifications
| Waveform | Pure sine wave |
|---|---|
| Voltage regulation | 230 Vac ± 5 % |
| Nominal input voltage | 230 Vac |
| Input frequency | 50 / 60 Hz, auto-detect |
| Efficiency (line mode) | > 95 % at rated load, battery full |
| Surge capacity | 2 × rated power for 5 s |
| Transfer time | 10 ms typical (UPS); 20 ms typical (appliances) |
| Certification | CE |
| Humidity | 5 to 95 % RH non-condensing |
ENSKY manufacturer specifications, subject to change without notice. Actual sizing depends on the site, the load profile and starting loads.
Unsure about sizing?
An engineer checks battery, inverter and solar array compatibility with you before any order.